Application:
1. The computer should be moisture-proof, dust-proof and oil-proof, so as not to cause into the plug-in components after oxidation caused by short circuit, poor contact and other failures. And six months to clean up the chassis dust.
2. Keyboard operation, the force should not be too large, just tap gently, otherwise it will affect life expectancy, or even damage.
3. Do not drop the electric control box, computer, keyboard, mouse, etc., so as not to damage the machine components.
Portable Dot Peen Marking Machine parameter
| model | Pneumatic marking machine |
| weight | 20kg |
| Machinpower | <300w |
| Power supply | 220v/110v |
| Strokefre quency | 300times/s |
| Marking speed | 2-5 characters(2x2mm)/s |
| Marking depth | 0.01 to 1mm (Vary to the material) |
| Standard marking area | 140x80mm |
Usage method
Computer system maintenance and care:
1. The power must be stable.
2. The computer should be operated by hand and not allowed to run other software.
3. Once the computer has a virus, please quickly please software technicians to deal with, or promptly contact with the company.
4. Computer environment should be consistent: no moisture, dust-free, oil-free, ventilated place.
Product features
Cylinder marking machine in our hot list, the long-term ranking. Frequently received by the phone burst, many companies have told us that since Zixu's cylinder marking machine was produced, basically ending the cylinder manufacturer marking difficult words. But the product is easy to sell, also aroused the jealous eyes of peers, our company after a lot of time research and development of products, many manufacturers began to embezzle. However, our core technology, these manufacturers have not mastered, which resulted in theft of manufacturers, products produced by the cylinder manufacturer can not solve the difficult marking problems. So, if you want to solve the problem of marking cylinders, please identify the ZIXU cylinder marking machine, also welcome friends to visit the factory inspection
FAQ
Computer system maintenance and care?
1. The power must be stable.
2. The computer should be operated by hand and not allowed to run other software.
3. Once the computer has a virus, please quickly please software technicians to deal with, or promptly contact with the company.
4. Computer environment should be consistent: no moisture, dust-free, oil-free, ventilated place.
Design feature
Pneumatic marking machine parts with top configuration, pneumatic marking machine is driven by pneumatic solenoid valve outlet control, in the use of marking machine in the process of electromagnetic valve have been blocked, the solenoid valve can not energized, the solenoid valve can not light sparkles, solenoid valve pneumatic marking machine is a very important part of the above, the better the quality of the electromagnetic valve, the greater the power, of course, longer life, can fully guarantee the normal marking effect, some customers always marking needle effect is not good, the same marking needle, if out of gas solenoid valve is not the same, marking effect is certainly there are differences, purple marking machine allocation of all genuine MAC solenoid valve, oil-water separation, good strength, with Chongqing type marking needle better
After service
The engineering department is responsible for tracking and handling customer problems reflected in the business and quality. According to the analysis reasons and testing data of the Quality Center, the products are insured and processed to ensure that the after-sales service of the products is completed in a reasonable, orderly and timely manner to satisfy the customers' satisfaction.
Packing and shipping
Carton pacaking with PE foam inside for courier express.
| Delviery time | 7-15 working days |
| Type of shipping | Express,air or sea |
| Terms of payment | T/T,credit card,western union,paypal |
| package size | 45*45*55cm |
| Gross weight | 22KG |
Chuke Factory
Chongqing CHUKE company is located in Beibei, Chongqing, the main plant covers an area of over 2,000 square meters, construction area of over 3,000 square meters, more than 20 employees, the company has a research and development technology center, of which 8 engineers, college or equivalent 67% %. By attracting domestic and foreign advanced technology and independent research and development combined with continuous innovation. Major producers of vertical machining centers, horizontal machining centers and CNC milling machines, gantry machining centers and CNC milling machine.
